Tips For Troubleshooting Your Home Alarm System In Boston
System malfunctions and false alarms can be aggravating, and even worse, may prevent your security system from doing its job effectively. Luckily, most troubles, from dead batteries to false alarms, are straightforward to fix. Explore our suggestions for troubleshooting your home alarm system in Boston. We’ll help you keep your family members safeguarded and your system running properly.
Test Your Home Security System In Boston
One sensible way to troubleshoot your property’s defense is to test it! Modern systems permit you to put them in test mode to keep you from initiating an emergency response. Once in test mode, do the following:
- Arm your system as you normally would when heading out.
- Open a window or door that has a contact sensor, or test other devices. Close the window or door once you’re done so it doesn’t prompt the alarm when you leave test mode.
- Let the alarm go off for 60 seconds to make sure a signal is sent to the security provider and an entry is made in the alarm activity log.
- Continue testing equipment as needed
- Review the systems’s activity log to confirm proper function.
No need to worry, monitoring specialists will be aware that your alarm system is undergoing a test. Be sure to switch out of test mode when done. It’s a good idea to test monthly or anytime you change your home’s phone or internet provider.
Evaluate The Positioning And Condition Of Motion Detectors
Although an integral element of your alarm system, motion sensors are well known for false alarms. You can help prevent them with a few straightforward troubleshooting steps.
- Perform a visual inspection. Is there anything that could move within the path of the sensor, like a curtain blown in a breeze?
- Is the sensor dirty? Cobwebs, dirt, and debris can lead to issues. Ensure the face is clean.
- Does the motion detector come with pet immunity you can enable? Some can be configured to ignore pets up to 100 pounds.
- When was the battery last replaced? A nearly depleted battery may affect performance or cause false alarms.
- Is a heat source affecting the sensor? Too much heat from direct sun or a fireplace can trigger an alarm.
Keep Batteries Ready And Look Out For Low Battery Warnings
One of the great advantages of the latest home security systems is that they’ll alert you when batteries are getting low. If your system is equipped with a mobile app or control panel, you’ll often find notifications there. Depending on the alarm, you could notice an intermittent beep when batteries are low.
Contact sensors, smoke detectors, motion sensors, and other wireless tools have batteries that need to be replaced every so often. It’s best to keep batteries ready and set a replacement schedule. Many systems also include a backup battery for the central control panel. This battery helps keep your system functioning if your power goes out and should recharge itself once the electricity is working again. If it doesn’t recharge, you should replace it.
Troubleshooting Is Effortless With ADT Home Security In Boston
As the leading name in home security, ADT designs systems that supply unsurpassed functionality and protection. Accessing test mode is easy through MyADT.com or the ADT+ app, and you’ll always get updates when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfect for your Boston home. Dial (617) 430-5865 or submit our form today!